8*10, 10*12,12*14,14*16
JLON
ROLL
white
PE
100M
This plastic spiral tube is made of HDPE and used to provide a very free‐lowing channel through which the resin is distributed near the point where the resin is first fed into the composite. Resin flows freely through the center of the spiral tube, but just as easily out of the spirals in the side, allowing resin to be supplied all the way along an edge of the composite.
We provide various diameter, pitch and thickness , for more information please contact us.
| Physical Property | ID*OD(MM) | ID*OD(MM) | ID*OD(MM) | ID*OD(MM) | ID*OD(MM) |
| 8*10 | 10*12 | 12*14 | 16*19 | 19*23 | |
| Thickness | 1mm | 1mm | 1mm | 1.5mm | 2mm |
| Working Temperature | 120C | 120C | 120C | 120C | 120C |
Resin distribution of Vacuum bagging applications.
A: Yes, We usually discuss with customers and help them find solutions.
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures /test data. With our quality tracking system, we will give you feedback in short time. If the quality problem confirmed,we will send you replacement or make refund as you like.
A: Usually we do EXW, FOB, CIF, and DDU.
This plastic spiral tube is made of HDPE and used to provide a very free‐lowing channel through which the resin is distributed near the point where the resin is first fed into the composite. Resin flows freely through the center of the spiral tube, but just as easily out of the spirals in the side, allowing resin to be supplied all the way along an edge of the composite.
We provide various diameter, pitch and thickness , for more information please contact us.
| Physical Property | ID*OD(MM) | ID*OD(MM) | ID*OD(MM) | ID*OD(MM) | ID*OD(MM) |
| 8*10 | 10*12 | 12*14 | 16*19 | 19*23 | |
| Thickness | 1mm | 1mm | 1mm | 1.5mm | 2mm |
| Working Temperature | 120C | 120C | 120C | 120C | 120C |
Resin distribution of Vacuum bagging applications.
A: Yes, We usually discuss with customers and help them find solutions.
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures /test data. With our quality tracking system, we will give you feedback in short time. If the quality problem confirmed,we will send you replacement or make refund as you like.
A: Usually we do EXW, FOB, CIF, and DDU.
