Polyvinyl Acetate Emulsion is the binder for fiberglass emulsion chopped strand mat.Polyvinyl Acetate PVAC Emulsion is with high binding property, and flexible products. and with high wettability with styrene.
Vinapoly
JLON
35069900
10, 000 Ton /Year
Polyvinyl Acetate Emulsion is the binder for fiberglass emulsion chopped strand mat.Polyvinyl Acetate PVAC Emulsion is with high binding property, and flexible products. and with high wettability with styrene.
Polyvinyl Acetate (Polyvinyl Acetate, PVAc) emulsion adhesive is vinyl acetate (VAc) as a reactive monomer in the dispersion medium by emulsion polymerisation and produced, also known as polyvinyl acetate emulsion, commonly known as white latex or white glue, is one of the largest production of varieties of synthetic resin emulsions.In 1929, Germany's H. Plauson was the first to use the emulsion polymerisation method to obtain polyvinyl acetate emulsion. In 1929, Germany's H. Plauson first used the emulsion polymerisation method to obtain polyvinyl acetate emulsion, industrial production was achieved in 1937, in particular, the German Farben (Farben) company's W. Starck and Frendeberg invented polyvinyl alcohol (PVA) as a protective colloid for vinyl acetate emulsion polymerisation method, which greatly promoted the development of the PVAc emulsion industry. China in the 1950s began to carry out research and development of polyvinyl acetate emulsion, to the 1970s polyvinyl acetate emulsion industry has developed rapidly, and now its output is second only to the polyacrylate emulsion adhesive, ranked second in the output of water-based adhesives.
Polyvinyl acetate emulsion .pdf
Strong adhesion to porous materials such as wood, paper, cotton, leather, ceramics, etc.; can be cured at room temperature, fast drying speed; adhesive layer colourless and transparent, not contaminated with the adhered material; no pollution of the environment, safe and harmless; single-component, easy to use, easy to clean, and a long storage period of up to 1 year or more.
1.chopped strand mat
2.spray up roving and chopped fiber
3.SMC,BMC,DMC roving
4.pultrusion and winding roving
Properties:
Excellent wet-out
Low migration
Very good balance of mat strength and flexibility
Specification:
Viscosity: 500 - 8000 mPa.s
Non - Volatiles: 59 % - 61 %
pH: 4.5 - 5.5
Polymer type: Plasticised vinylacetate
Stabilising system: Colloid
Properties:
Strong adhesion, good chopability.
Fast penetration of unsaturated polyester, good transparency of FRP
Specification:
Appearance: milky white emulsion
Solid content: 49-51%
Viscosity: <1000mPa.S(25℃)
PH value: 3.5-5.5
Ionic charge: cations
Properties:
Silane-modified, excellent adhesion to glass.
Strong primary filament bundling, excellent high temperature resistance.
High acetone insolubility, good solvent resistance
Specification:
Appearance: milky white emulsion
Solid content: 55.0±1.0 %
Viscosity: 1000-5000mPa.S(25℃)
PH value: 4.0-6.0
Acetone insoluble rate: 83-90 %
TG(℃) : 42
Properties:
Strong adhesion, good clustering property of glass fibre bundle.
Glass fibre is easy to chop.
Fast wet out with resin
Specification:
Appearance: milky white emulsion
Solid content: 55.0±1.0 %
Viscosity: 500-2000mPa.S(25℃)
PH value: 3.5-4.5
Ionic charge: Non-ionic
TG(℃): 26
Properties:Waterborne epoxy,High strand integrity
Specification:
Appearance: Pale yellow liquid
Solid content: 55.0±1.0 %
1.Store at 5-35℃, avoid direct sunlight, cover the container tightly after taking.
2.Please use after stirring.
3.Shelf life is 6 months.
4.Steel drum with PE bag
Changzhou JLON Composite Co., Ltd.
A company who believes a satisfied customer is the best business accomplishment.
Changzhou JLON Composite Co. provides a wide range of reinforcements tailored to many applications such as construction, marine, pultruded profiles, transportation, wind energy, sports, etc. We’re one stop source for FRP raw materials.
In recent years we’ve entered new business axial fan and PVB/SGP film. Now there’re mainly two business sectors in our company:
A. Composite reinforcement materials and building materials:
1. Fiberglass products such as roving, chopped strand mat, woven roving, stitch mat, multiaxials, infusion mat, nonwovens for roofing, flooring, ceiling and walls of buildings
2. High performance fiber such as carbon fiber, aramid fiber, basalt fiber, high silica fiberglass, quartz
3. Core materials such as PVC/PET foam, PP honeycomb
4. Chemicals such as UP resin, vinyl ester resin, epoxy resin, SMC/BMC, MDI
5. Auxiliary materials such as infusion consumables, FRP tools
B. Axial fan:
We provide PAG and aluminum axial fan for HVAC, engineering equipment...We have different blades, hubs to satisfy customers’ specific needs.
A: Yes, We usually discuss with customers and help them find solutions.
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures and test data. We will give you feedback in short time. If the quality problem confirmed, we will discuss about compensation with you.
A: Usually we do EXW, FOB, CIF and DDU
Polyvinyl Acetate Emulsion is the binder for fiberglass emulsion chopped strand mat.Polyvinyl Acetate PVAC Emulsion is with high binding property, and flexible products. and with high wettability with styrene.
Polyvinyl Acetate (Polyvinyl Acetate, PVAc) emulsion adhesive is vinyl acetate (VAc) as a reactive monomer in the dispersion medium by emulsion polymerisation and produced, also known as polyvinyl acetate emulsion, commonly known as white latex or white glue, is one of the largest production of varieties of synthetic resin emulsions.In 1929, Germany's H. Plauson was the first to use the emulsion polymerisation method to obtain polyvinyl acetate emulsion. In 1929, Germany's H. Plauson first used the emulsion polymerisation method to obtain polyvinyl acetate emulsion, industrial production was achieved in 1937, in particular, the German Farben (Farben) company's W. Starck and Frendeberg invented polyvinyl alcohol (PVA) as a protective colloid for vinyl acetate emulsion polymerisation method, which greatly promoted the development of the PVAc emulsion industry. China in the 1950s began to carry out research and development of polyvinyl acetate emulsion, to the 1970s polyvinyl acetate emulsion industry has developed rapidly, and now its output is second only to the polyacrylate emulsion adhesive, ranked second in the output of water-based adhesives.
Polyvinyl acetate emulsion .pdf
Strong adhesion to porous materials such as wood, paper, cotton, leather, ceramics, etc.; can be cured at room temperature, fast drying speed; adhesive layer colourless and transparent, not contaminated with the adhered material; no pollution of the environment, safe and harmless; single-component, easy to use, easy to clean, and a long storage period of up to 1 year or more.
1.chopped strand mat
2.spray up roving and chopped fiber
3.SMC,BMC,DMC roving
4.pultrusion and winding roving
Properties:
Excellent wet-out
Low migration
Very good balance of mat strength and flexibility
Specification:
Viscosity: 500 - 8000 mPa.s
Non - Volatiles: 59 % - 61 %
pH: 4.5 - 5.5
Polymer type: Plasticised vinylacetate
Stabilising system: Colloid
Properties:
Strong adhesion, good chopability.
Fast penetration of unsaturated polyester, good transparency of FRP
Specification:
Appearance: milky white emulsion
Solid content: 49-51%
Viscosity: <1000mPa.S(25℃)
PH value: 3.5-5.5
Ionic charge: cations
Properties:
Silane-modified, excellent adhesion to glass.
Strong primary filament bundling, excellent high temperature resistance.
High acetone insolubility, good solvent resistance
Specification:
Appearance: milky white emulsion
Solid content: 55.0±1.0 %
Viscosity: 1000-5000mPa.S(25℃)
PH value: 4.0-6.0
Acetone insoluble rate: 83-90 %
TG(℃) : 42
Properties:
Strong adhesion, good clustering property of glass fibre bundle.
Glass fibre is easy to chop.
Fast wet out with resin
Specification:
Appearance: milky white emulsion
Solid content: 55.0±1.0 %
Viscosity: 500-2000mPa.S(25℃)
PH value: 3.5-4.5
Ionic charge: Non-ionic
TG(℃): 26
Properties:Waterborne epoxy,High strand integrity
Specification:
Appearance: Pale yellow liquid
Solid content: 55.0±1.0 %
1.Store at 5-35℃, avoid direct sunlight, cover the container tightly after taking.
2.Please use after stirring.
3.Shelf life is 6 months.
4.Steel drum with PE bag
Changzhou JLON Composite Co., Ltd.
A company who believes a satisfied customer is the best business accomplishment.
Changzhou JLON Composite Co. provides a wide range of reinforcements tailored to many applications such as construction, marine, pultruded profiles, transportation, wind energy, sports, etc. We’re one stop source for FRP raw materials.
In recent years we’ve entered new business axial fan and PVB/SGP film. Now there’re mainly two business sectors in our company:
A. Composite reinforcement materials and building materials:
1. Fiberglass products such as roving, chopped strand mat, woven roving, stitch mat, multiaxials, infusion mat, nonwovens for roofing, flooring, ceiling and walls of buildings
2. High performance fiber such as carbon fiber, aramid fiber, basalt fiber, high silica fiberglass, quartz
3. Core materials such as PVC/PET foam, PP honeycomb
4. Chemicals such as UP resin, vinyl ester resin, epoxy resin, SMC/BMC, MDI
5. Auxiliary materials such as infusion consumables, FRP tools
B. Axial fan:
We provide PAG and aluminum axial fan for HVAC, engineering equipment...We have different blades, hubs to satisfy customers’ specific needs.
A: Yes, We usually discuss with customers and help them find solutions.
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures and test data. We will give you feedback in short time. If the quality problem confirmed, we will discuss about compensation with you.
A: Usually we do EXW, FOB, CIF and DDU
