Infusion mat is a sandwich complex which consists of one or two layers of chopped strand mat outside and a core of PP (resin flow zone) in the middle. It is designed for closed injection processes such as RTM (Resin Transfer Moulding) and RTM light.Resin flows much faster, which is time saving.
E glass
in Carton
1270mm
Needle Mat
70193900
Fiberglass PP Core
Infusion mat is a sandwich complex which consists of one or two layers of chopped strand mat outside and a core of PP (resin flow zone) in the middle. It is designed for closed injection processes such as RTM (Resin Transfer Moulding) and RTM light.Resin flows much faster, which is time saving.
Very good drapability
Faster flow rate
Suitable for use in complicated mould shapes
Increased control over laminate thickness
Product No. | Overall | Chop Density | Core Density | Chop Density |
M300P180M300 | 800.85 | 300 | 180 | 300 |
M300P250M300 | 870.65 | 300 | 250 | 300 |
M450P180M450 | 1100.65 | 450 | 180 | 450 |
M450P250M450 | 1170.65 | 450 | 250 | 450 |
M600P180M600 | 1400.65 | 600 | 180 | 600 |
M600P250M600 | 1470.65 | 600 | 250 | 600 |
A layer of chopped strand mat can be replaced by biaxial fabric in 0/90 degree to give higher strength.
Product No. | Overall Density (g/m²) | 0º Roving Density (g/m²) | 90º Roving Density (g/m²) | Core Density (g/m²) | Chop Density (g/m²) |
LT600P180M300 | 1080 | 330 | 270 | 180 | 300 |
LT600P180M600 | 1380 | 330 | 270 | 180 | 600 |
LT800P180M450 | 1430 | 413 | 387 | 180 | 450 |
A: Yes, We usually discuss with customers and help them find solutions.
Q2.How can I get a sample from you to check quality?
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures test data With our quality tracking system, we will give you feedback in short time. If the quality problem confirmed,we will send you replacement or make refund as you like.
A: Usually we do EXW, FOB, CIF and DDU
Infusion mat is a sandwich complex which consists of one or two layers of chopped strand mat outside and a core of PP (resin flow zone) in the middle. It is designed for closed injection processes such as RTM (Resin Transfer Moulding) and RTM light.Resin flows much faster, which is time saving.
Very good drapability
Faster flow rate
Suitable for use in complicated mould shapes
Increased control over laminate thickness
Product No. | Overall | Chop Density | Core Density | Chop Density |
M300P180M300 | 800.85 | 300 | 180 | 300 |
M300P250M300 | 870.65 | 300 | 250 | 300 |
M450P180M450 | 1100.65 | 450 | 180 | 450 |
M450P250M450 | 1170.65 | 450 | 250 | 450 |
M600P180M600 | 1400.65 | 600 | 180 | 600 |
M600P250M600 | 1470.65 | 600 | 250 | 600 |
A layer of chopped strand mat can be replaced by biaxial fabric in 0/90 degree to give higher strength.
Product No. | Overall Density (g/m²) | 0º Roving Density (g/m²) | 90º Roving Density (g/m²) | Core Density (g/m²) | Chop Density (g/m²) |
LT600P180M300 | 1080 | 330 | 270 | 180 | 300 |
LT600P180M600 | 1380 | 330 | 270 | 180 | 600 |
LT800P180M450 | 1430 | 413 | 387 | 180 | 450 |
A: Yes, We usually discuss with customers and help them find solutions.
Q2.How can I get a sample from you to check quality?
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures test data With our quality tracking system, we will give you feedback in short time. If the quality problem confirmed,we will send you replacement or make refund as you like.
A: Usually we do EXW, FOB, CIF and DDU
