JL10
E-GLASS
A.It is used for the connection of 10kV, 35kV single core or three core cold shrinkable cable intermediate joint in power cable industry, as well as external protection of heat shrinkable cable intermediate joint.
B.It is used in the cold shrinkable tube wrapping technology in the connection of non inflatable communication cables, and can form ideal mechanical protection for cable joints.
C.It is used for rapid leak proof repair, especially for pipeline repair. With plastic steel soil, universal repair and other leak repair materials, will greatly improve the pressure resistance of the repaired pipeline.
D. It can be used in the welding process of industrial manufacturing. It can make the welding arm sheath of hanging electric welding machine to prevent damage to the welding gun.
This product adopts wet curing adhesive material and high sunlight resistance as the base material net cloth bottom lining, easy to use, directly wrapped on the cable accessories or cable can form a high strength outer protective layer, can strengthen the mechanical protection of the joint and cable.
1. water curing, in the air can also slow curing.
2. Temperature resistance 150ºC.
3. Adhesive to rubber, PVC, polyester, metal, glass fiber and concrete materials.
4.10 minutes fast curing, can be used in water.
5. Water resistance and most chemical solvents and fuel oil, strength moisture retention rate above 85%.
6. Resistant to mechanical wear and can withstand up to 10 kg of internal pressure.
7. There is almost no tension during expansion.
8. Automatic lap of the end end.
9. Adopt high performance packing material, not easy to damage.
Our company's bandage glass fiber fabric is designed for making orthopaedic casting tape. It is knitted by a warp knitting machine using alkali-free glass fiber yarn, and treated by our self-developed high-temperature heat treatment.It is without burrs, frying, and good shaping effect compatible with polyurethane resin , wear resistance, easy to cut, low heat generation, good air permeability, X-ray perspective and long storage time, etc.
The sound-absorbing coated glass mat is widely used as a base material for sound-absorbing ceilings and wall panels using mineral wool, glass wool, rock wool, XPS, etc. The finished products usually used in places that require noise reduction and improved acoustic quality, such as music halls, cinemas, recording studios, conference rooms, offices, etc.
1. Excellent moulding performance
2. Smooth surface after moulding
3. Easy to operate
4. Breathable, comfortable, wear-resistant and waterproof
5. Extra long shelf life
9 boxes per layer, 4 layers, 36 boxes per pallet
Changzhou JLON Composite Co., Ltd.
A company who believes a satisfied customer is the best business accomplishment.
Changzhou JLON Composite Co. provides a wide range of reinforcements tailored to many applications such as construction, marine, pultruded profiles, transportation, wind energy, sports, etc. We’re one stop source for FRP raw materials.
In recent years we’ve entered new business axial fan and PVB/SGP film. Now there’re mainly two business sectors in our company:
A. Composite reinforcement materials and building materials:
1. Fiberglass products such as roving, chopped strand mat, woven roving, stitch mat, multiaxials, infusion mat, nonwovens for roofing, flooring, ceiling and walls of buildings
2. High performance fiber such as carbon fiber, aramid fiber, basalt fiber, high silica fiberglass, quartz
3. Core materials such as PVC/PET foam, PP honeycomb
4. Chemicals such as UP resin, vinyl ester resin, epoxy resin, SMC/BMC, MDI
5. Auxiliary materials such as infusion consumables, FRP tools
B. Axial fan:
We provide PAG and aluminum axial fan for HVAC, engineering equipment...We have different blades, hubs to satisfy customers’ specific needs.
A: Yes, We usually discuss with customers and help them find solutions.
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures and test data. We will give you feedback in short time. If the quality problem confirmed, we will discuss about compensation with you.
A: Usually we do EXW, FOB, CIF and DDU
A.It is used for the connection of 10kV, 35kV single core or three core cold shrinkable cable intermediate joint in power cable industry, as well as external protection of heat shrinkable cable intermediate joint.
B.It is used in the cold shrinkable tube wrapping technology in the connection of non inflatable communication cables, and can form ideal mechanical protection for cable joints.
C.It is used for rapid leak proof repair, especially for pipeline repair. With plastic steel soil, universal repair and other leak repair materials, will greatly improve the pressure resistance of the repaired pipeline.
D. It can be used in the welding process of industrial manufacturing. It can make the welding arm sheath of hanging electric welding machine to prevent damage to the welding gun.
This product adopts wet curing adhesive material and high sunlight resistance as the base material net cloth bottom lining, easy to use, directly wrapped on the cable accessories or cable can form a high strength outer protective layer, can strengthen the mechanical protection of the joint and cable.
1. water curing, in the air can also slow curing.
2. Temperature resistance 150ºC.
3. Adhesive to rubber, PVC, polyester, metal, glass fiber and concrete materials.
4.10 minutes fast curing, can be used in water.
5. Water resistance and most chemical solvents and fuel oil, strength moisture retention rate above 85%.
6. Resistant to mechanical wear and can withstand up to 10 kg of internal pressure.
7. There is almost no tension during expansion.
8. Automatic lap of the end end.
9. Adopt high performance packing material, not easy to damage.
Our company's bandage glass fiber fabric is designed for making orthopaedic casting tape. It is knitted by a warp knitting machine using alkali-free glass fiber yarn, and treated by our self-developed high-temperature heat treatment.It is without burrs, frying, and good shaping effect compatible with polyurethane resin , wear resistance, easy to cut, low heat generation, good air permeability, X-ray perspective and long storage time, etc.
The sound-absorbing coated glass mat is widely used as a base material for sound-absorbing ceilings and wall panels using mineral wool, glass wool, rock wool, XPS, etc. The finished products usually used in places that require noise reduction and improved acoustic quality, such as music halls, cinemas, recording studios, conference rooms, offices, etc.
1. Excellent moulding performance
2. Smooth surface after moulding
3. Easy to operate
4. Breathable, comfortable, wear-resistant and waterproof
5. Extra long shelf life
9 boxes per layer, 4 layers, 36 boxes per pallet
Changzhou JLON Composite Co., Ltd.
A company who believes a satisfied customer is the best business accomplishment.
Changzhou JLON Composite Co. provides a wide range of reinforcements tailored to many applications such as construction, marine, pultruded profiles, transportation, wind energy, sports, etc. We’re one stop source for FRP raw materials.
In recent years we’ve entered new business axial fan and PVB/SGP film. Now there’re mainly two business sectors in our company:
A. Composite reinforcement materials and building materials:
1. Fiberglass products such as roving, chopped strand mat, woven roving, stitch mat, multiaxials, infusion mat, nonwovens for roofing, flooring, ceiling and walls of buildings
2. High performance fiber such as carbon fiber, aramid fiber, basalt fiber, high silica fiberglass, quartz
3. Core materials such as PVC/PET foam, PP honeycomb
4. Chemicals such as UP resin, vinyl ester resin, epoxy resin, SMC/BMC, MDI
5. Auxiliary materials such as infusion consumables, FRP tools
B. Axial fan:
We provide PAG and aluminum axial fan for HVAC, engineering equipment...We have different blades, hubs to satisfy customers’ specific needs.
A: Yes, We usually discuss with customers and help them find solutions.
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures and test data. We will give you feedback in short time. If the quality problem confirmed, we will discuss about compensation with you.
A: Usually we do EXW, FOB, CIF and DDU
