About Us         Download          Blog         Contact
You are here: Home » Tools & Auxiliaries » Vacuum Infusion Consumables » Release Film for Composite Vacuum Bagging and Resin Infusion

Release Film for Composite Vacuum Bagging and Resin Infusion

RF35 Perforated Release Film is a red/blue color PE release film that is designed for low cost applications. It will release from epoxy, polyester and vinyl ester resin systems. It is suitable for resin cure temperature up to 250°F (121°C).
  • 35G

  • JLON

  • ROLL

  • red

  • 100M

Availability:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Release Film for Vacuum Infusion and Composite Manufacturing


JLON supplies perforated and non-perforated release films for composite manufacturing processes, with a focus on vacuum infusion, wet lay-up and standard-temperature vacuum bagging.

Release film is a polymer separation layer used in composite lay-ups to prevent processing consumables from bonding to the laminate. Depending on its perforation pattern and position in the consumable stack, it can also allow resin transfer or controlled resin bleed.

JLON's standard release film range includes two grades:

· JL-RF130: Modified polyethylene (PE) release film, with a maximum specified service temperature of 130°C.

· JL-RF160: PP/PE/PA6-based release film, with a maximum specified service temperature of 160°C.

Both grades are available in perforated and non-perforated configurations. Different film thicknesses, perforation patterns and roll widths are available for different composite manufacturing requirements.

These products are primarily intended for conventional composite processing. For curing processes requiring temperatures above 160°C, please refer to our High-Temperature Release Film range.



Release Film


Release Film Product Range


JLON offers two standard release film grades to accommodate different processing temperatures and composite manufacturing requirements.


Property

JL-RF130

JL-RF160

Base Material

Modified PE

PP / PE / PA6

Nominal Thickness

35 μm

40 μm

Thickness Tolerance

±3 μm

±3 μm

Maximum Service Temperature

130°C (266°F)

160°C (320°F)

Available Types

Perforated / Non-perforated

Perforated / Non-perforated

Available Colors

Blue / Red

Pale Blue

Available Width

Up to 3.1 m*

Up to 3.1 m*

Typical Applications

Vacuum bagging, wet lay-up, selected resin infusion processes

Higher-temperature vacuum bagging, prepreg curing, composite processing


Available widths depend on film grade and production arrangements. Please confirm the required width and roll length before ordering.


Release Film Perforation Patterns


JLON release films are available in different perforation patterns to accommodate various composite manufacturing requirements.

The perforation configurations are defined by three main parameters:

· Hole Diameter: The diameter of individual openings in the film.

· Row Pitch: The distance between holes along the same row.

· Diagonal Pitch: The distance between holes in adjacent rows.

Available patterns include Standard, P0, P1 and P3, as illustrated below. Different configurations provide options for different laminate designs and consumable arrangements.

Customers can specify their preferred perforation pattern or provide an existing film sample or technical drawing for reference when requesting a quotation.


Release film


Key Features of JLON Release Film


Reliable Release Performance

Provides a separation layer between composite laminates and processing consumables, helping facilitate removal after curing.


Wide Roll Availability

Film widths of up to 3.1 m are available, subject to grade and production arrangements, making the products suitable for components of different dimensions.


Compatibility with Common Resin Systems

JLON release films can be evaluated for use with epoxy, polyester and vinyl ester resin systems, depending on the film grade and actual curing conditions.


Perforated vs Non-Perforated Release Film

The choice between perforated and non-perforated release film depends mainly on whether resin needs to pass through the separation layer during manufacturing.


Perforated Release Film

Perforated release film contains openings distributed across the film surface. These openings provide pathways for resin and gases to pass through under suitable processing conditions.

In vacuum consolidation and controlled-bleed applications, perforated film can be used with bleeder materials to remove excess resin.

In selected resin infusion arrangements, it can also serve as a permeable separation layer between the laminate or peel ply and resin distribution media.

The amount of resin passing through the film depends on the perforation geometry, resin viscosity, pressure, temperature and consumable arrangement.


Non-Perforated Release Film

Non-perforated release film provides a continuous barrier to resin flow through the film.

It is suitable for applications where resin retention is required, including certain no-bleed prepreg systems and intermediate vacuum debulking operations.

Because air and gases cannot pass directly through an unperforated film, the vacuum bagging arrangement must provide appropriate alternative evacuation paths.


Comparison of Perforated and Non-Perforated Release Film


Feature

Perforated Release Film

Non-Perforated Release Film

Film Structure

Film with controlled openings

Continuous film without holes

Resin Passage

Permitted through perforations

Blocked through the film

Gas Passage

Possible through perforations

Requires alternative evacuation paths

Resin Management

Supports controlled resin bleed or transfer

Helps retain resin

Typical Processes

Controlled-bleed prepreg, wet lay-up, selected infusion systems

No-bleed prepreg, vacuum debulking, resin-retention applications

Potential Risk

Excessive resin bleed if incorrectly selected

Entrapped gases if ventilation is inadequate

Surface Effect

Perforation marks may occur

No perforation pattern transferred from the film


Technical Note

Perforation pattern should be selected according to the complete composite process rather than hole size alone. Resin content and laminate quality are influenced by the resin system, vacuum pressure, curing cycle, bleeder materials and overall processing configuration.


Technical Specifications


The following table summarizes the supplier-provided technical specifications of JL-RF130 and JL-RF160.

Property

Test Method

JL-RF130

JL-RF160

Base Material

—

Modified PE

PP / PE / PA6

Thickness

GB/T 6672

35 ± 3 μm

40 ± 3 μm

Tensile Strength, MD

ASTM D882

≥25 MPa

≥30 MPa

Tensile Strength, TD

ASTM D882

≥25 MPa

≥20 MPa

Elongation at Break, MD

ASTM D882

≥400%

≥400%

Elongation at Break, TD

ASTM D882

≥400%

≥400%

Nominal Service Temperature Range

—

−50°C to +130°C

−50°C to +160°C

Nominal Hole Diameter

Supplier Specification

0.5 ± 0.1 mm*

0.5 ± 0.1 mm*

Perforation Options

Supplier Specification

P3 / P6 / P16*

P3 / P6 / P16*

Standard Roll Sizes

—

1.2 / 1.3 / 1.5 m × 500–610 m

1.0 / 1.5 / 2.0 m × 500 m

Perforation pattern availability, hole dimensions and spacing must be confirmed for the selected grade.


Technical Note


The above values are preliminary product specification data. Final specifications and applicable test reports should be confirmed with JLON before procurement.

Film performance under actual curing conditions depends on processing temperature, duration, pressure, resin system and tooling configuration.


Applications of Release Film in Composite Manufacturing


JLON standard release films are designed for conventional composite manufacturing, particularly vacuum infusion, wet lay-up and standard-temperature vacuum bagging.


Resin Infusion and Vacuum-Assisted Resin Transfer


Release film can be incorporated into selected vacuum infusion lay-ups as a separation layer between the laminate and resin distribution materials.

This helps facilitate the removal of processing consumables after production.

Typical applications include:

· Marine Composites: Boat hulls, decks, superstructures and fiberglass sandwich structures.

· Wind Energy: Wind turbine blades, nacelle covers and other vacuum-infused composite components.

· Industrial FRP: Composite tanks, panels, covers and industrial equipment.

· Composite Sandwich Panels: Fiberglass or carbon fiber sandwich structures using compatible foam or honeycomb core materials.


Wet Lay-Up Under Vacuum


In wet lay-up manufacturing, reinforcement fabrics are impregnated with liquid resin before being consolidated under vacuum.

Release film can be incorporated into the consumable stack to separate the laminate from breather and other processing materials.

It is particularly relevant to fiberglass components, large composite panels and molded FRP structures.


Standard Prepreg Vacuum Bagging


Release film is used in suitable prepreg vacuum bagging assemblies to separate the laminate from breather and bleeder materials.

The selected configuration should follow the prepreg manufacturer's recommended lay-up procedure and curing specifications.

Typical applications include carbon fiber and fiberglass prepreg panels, molded components and sandwich structures.


Vacuum Debulking


During intermediate vacuum debulking, release film can be placed within the consumable stack to help prevent processing materials from adhering to the uncured laminate.

Its suitability depends on the prepreg system, laminate geometry and vacuum arrangement.


How to Choose the Right Release Film


Selecting the right release film requires consideration of processing temperature, resin management requirements, film dimensions and the overall consumable arrangement.


Select the Appropriate Temperature Grade


Choose a film with a verified service temperature suitable for the maximum laminate temperature, including potential resin exotherm.


Peak Processing Temperature

Suggested Release Film

Up to 130°C

JL-RF130, subject to process validation

Above 130°C and up to 160°C

JL-RF160, subject to process validation

Above 160°C

Request a suitable high-temperature release film

Avoid using a film beyond its verified service temperature. For processes operating close to the specified temperature limit, confirm suitability with JLON before production.


Choose Perforated or Non-Perforated Film


Select perforated film according to the required resin bleed and transfer characteristics. Choose non-perforated film when resin retention is required.

The final configuration should follow the resin manufacturer's recommendations and the validated bagging procedure.


Confirm the Perforation Pattern


Different perforation patterns provide different resin passage characteristics.

When selecting a perforation pattern, consider:

· Hole Diameter: The diameter of each opening.

· Row and Diagonal Pitch: The spacing and distribution of the holes.

· Resin System: Epoxy, polyester, vinyl ester or another formulation.

· Processing Conditions: Vacuum pressure, temperature and curing duration.

· Resin Management: The required level of resin bleed or retention.

When replacing an existing supplier's release film, providing a sample or perforation drawing can help confirm the closest suitable configuration.


Select Film Width and Roll Length


Film dimensions should match the component size, mold layout and manufacturing method.

When requesting a quotation, please specify:

· Required film width.

· Required roll length or preferred roll weight.

· Approximate component or mold dimensions.

· Perforated or non-perforated configuration.

· Estimated order quantity.

JLON can discuss standard and customized dimensions according to product availability and production requirements.


Vacuum Infusion Release Film


Release Film vs Peel Ply vs Vacuum Bagging Film


Release film, peel ply and vacuum bagging film are different materials used for different functions within a composite vacuum bagging assembly.

Material

Main Function

Typical Position

Release Film

Separates processing consumables from the laminate and controls resin passage where perforated

Between laminate/peel ply and other consumables, depending on process

Peel Ply

Provides a removable fabric layer and can create a textured surface for subsequent processing

Directly against the laminate

Vacuum Bagging Film

Creates the flexible, airtight enclosure required to apply vacuum

Outer layer of the vacuum bagging assembly


Release Film

Release film is primarily used to separate the laminate from other processing consumables. Perforated versions can also support controlled resin transfer or bleed.


Peel Ply

Peel ply is a removable fabric placed directly against the laminate. After curing, it can be removed to expose a textured surface for subsequent bonding or coating operations, subject to the specified surface preparation requirements.


Vacuum Bagging Film

Vacuum bagging film creates the airtight enclosure around the laminate and consumables. When connected to a vacuum system, it enables atmospheric pressure to consolidate the composite lay-up.

Release film does not replace peel ply or vacuum bagging film. Each material has a separate function in the vacuum bagging assembly.


Frequently Asked Questions About Release Film


1. What is release film used for in composite manufacturing?

Release film separates composite laminates from processing consumables during vacuum bagging, resin infusion and curing. Perforated versions can also allow resin to pass through the film, while non-perforated versions provide a continuous resin barrier.


2. What is the difference between perforated and non-perforated release film?

Perforated release film contains openings that allow resin and gases to pass through under suitable conditions. Non-perforated film blocks resin passage and is used when resin retention is required.


3. Is perforated release film necessary for vacuum infusion?

Not always. Some infusion systems use peel ply and flow media directly. Perforated release film can be used when a permeable separation layer is required between the laminate and resin distribution media.


4. Which release film is suitable for epoxy, polyester and vinyl ester resins?

JLON release films can be evaluated with epoxy, polyester and vinyl ester resin systems. Suitability depends on the film grade, curing temperature, resin formulation and processing conditions.


5. What is the difference between JL-RF130 and JL-RF160?

JL-RF130 is a modified PE release film with a nominal thickness of 35 μm and a maximum specified service temperature of 130°C.

JL-RF160 is a PP/PE/PA6-based release film with a nominal thickness of 40 μm and a maximum specified service temperature of 160°C.


6. What do P3, P6 and P16 mean?

P3, P6 and P16 are supplier perforation pattern designations. Actual hole diameter, spacing and distribution should be confirmed for the selected film grade.

When replacing another supplier's product, providing the existing film sample or perforation drawing is recommended.


7. Can release film replace peel ply?

No, not in every application. Release film primarily provides separation and resin-flow control, while peel ply provides a removable fabric interface and can create a textured surface for subsequent processing.


8. Can I use JL-RF130 for a 150°C curing process?

JL-RF130 has a maximum specified service temperature of 130°C and should not be selected for a 150°C process without additional validated performance data. JL-RF160 may be considered, subject to confirmation of the complete curing cycle.


9. Can JLON provide samples and technical datasheets?

Yes. Contact JLON with your required film thickness, operating temperature, perforation pattern, roll dimensions and composite manufacturing process. Our team can discuss available specifications, samples and product suitability.




Previous: 
Next: 

PRODUCT CATEGORY

Consult Your Fiberglass Expert

We help you avoid the pitfalls to deliver the quality and value your PVC Foam Core need, on-time and on-budget.
Get In Touch
Call Us:+86 19306129712
Chat with Us on WhatsApp:
Add Us on WeChat: +86 18651201931
NO.2-608 FUHANYUAN,TAIHU RD, CHANGZHOU,JIANGSU ,CHINA
Scan to Chat with Us
Products
Application
Quick Links
COPYRIGHT © 2024 CHANGZHOU JLON COMPOSITE CO., LTD. ALL RIGHTS RESERVED.
Scan to Chat with Us