UPR-GP
JLon
drum/IBC
26098-37-3
3907910000
JL-191RS Hand lay-up general purpose unsaturated polyester resin
JL-191RS unsaturated polyester resin is a kind of general purpose resin, low viscosity, good mechanical strength and high elongation. It can be applied in all kinds of FRP products as well as lay-up products.
| Item | Unit | Index | Test standard |
| Appearance | -- | Clear pale yellow liquid | GB/T 8237.4.1.1 |
| viscosity | 25ºC,Pa.S | 0.25~0.45 | GB/T 7193.1 |
| gel time | 25ºC,min | 10.5~21.5 | GB/T 7193.6 |
| acid value | mgKOH/g | 25~30 | GB/T 2895 |
| non-volatile | % | 61~67 | GB/T 7193.3 |
| Item | Unit | Measured value | Test standard |
| Barcol Hardness | -- | 41 | GB 3854-83 |
| HDT | ºC | 70 | GB 1634-04 |
| Flexural Strength | MPa | 114 | GB/T 2570-95 |
| Tensile strength | MPa | 60 | GB/T 2568-95 |
| Elongation at break | % | 3.5 | GB/T 2568-95 |
| Impact Strength | KJ/m2 | 10.2 | GB/T 2571-95 |
Remark: casting matrix should follow GB8237-87
Hardness system: hardener 55%MEKPO:1.5% accelerator E1:1%
60ºC×3 Hours + 80ºC×2 hours
| Item | Unit | Measured value | Test standard |
| Flexural Strength | MPa | 365 | GB/T1449-83 |
| Tensile strength | MPa | 290 | GB/T1447-83 |
| Impact Strength | KJ/m2 | 235 | GB/T 1451-83 |
Remark: FRP according to GB 8237-87
Hardness system: hardener55%MEKPO:2% accelerator E1:2% 60ºC×3hours + 110ºC×3 hours
The loading and transportation must follow the rules in chapter 5 of dangerous chemicals regulations. The products should store under 25 ºC and avoid the sunshine ,heat source and fire source. The shelf life is 6 months.
A: Yes, We usually discuss with customers and help them find solutions.
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures and test data. We will give you feedback in short time. If the quality problem confirmed, we will discuss about compensation with you.
A: Usually we do EXW, FOB, CIF and DDU
JL-191RS Hand lay-up general purpose unsaturated polyester resin
JL-191RS unsaturated polyester resin is a kind of general purpose resin, low viscosity, good mechanical strength and high elongation. It can be applied in all kinds of FRP products as well as lay-up products.
| Item | Unit | Index | Test standard |
| Appearance | -- | Clear pale yellow liquid | GB/T 8237.4.1.1 |
| viscosity | 25ºC,Pa.S | 0.25~0.45 | GB/T 7193.1 |
| gel time | 25ºC,min | 10.5~21.5 | GB/T 7193.6 |
| acid value | mgKOH/g | 25~30 | GB/T 2895 |
| non-volatile | % | 61~67 | GB/T 7193.3 |
| Item | Unit | Measured value | Test standard |
| Barcol Hardness | -- | 41 | GB 3854-83 |
| HDT | ºC | 70 | GB 1634-04 |
| Flexural Strength | MPa | 114 | GB/T 2570-95 |
| Tensile strength | MPa | 60 | GB/T 2568-95 |
| Elongation at break | % | 3.5 | GB/T 2568-95 |
| Impact Strength | KJ/m2 | 10.2 | GB/T 2571-95 |
Remark: casting matrix should follow GB8237-87
Hardness system: hardener 55%MEKPO:1.5% accelerator E1:1%
60ºC×3 Hours + 80ºC×2 hours
| Item | Unit | Measured value | Test standard |
| Flexural Strength | MPa | 365 | GB/T1449-83 |
| Tensile strength | MPa | 290 | GB/T1447-83 |
| Impact Strength | KJ/m2 | 235 | GB/T 1451-83 |
Remark: FRP according to GB 8237-87
Hardness system: hardener55%MEKPO:2% accelerator E1:2% 60ºC×3hours + 110ºC×3 hours
The loading and transportation must follow the rules in chapter 5 of dangerous chemicals regulations. The products should store under 25 ºC and avoid the sunshine ,heat source and fire source. The shelf life is 6 months.
A: Yes, We usually discuss with customers and help them find solutions.
A: Usually a sample will be prepared within one week after specification agreed.
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures and test data. We will give you feedback in short time. If the quality problem confirmed, we will discuss about compensation with you.
A: Usually we do EXW, FOB, CIF and DDU
