JLONCell 130 kg/m³ PVC Foam Core

Overview of PVC Foam Core

JLONCell 130 kg/m³ PVC Foam Core is a structural-grade, closed-cell PVC foam developed for industrial composite applications requiring high stiffness and load-bearing capacity.
It is widely used in industrial FRP sandwich panels, machine covers, equipment housings, transportation panels, and reinforced modular composite structures, helping manufacturers achieve maximum structural performance while controlling weight.
With uniform cell structure and controlled density, JLONCell 130 ensures consistent quality for both prototype development and mass production of high-performance industrial composite panels.

Key Advantages for Industrial FRP Panels

Density: 130 kg/m³

Superior strength-to-weight ratio

High stiffness for medium-to-high load panels

Closed-cell PVC structure with low resin absorption

Stable thickness under vacuum pressure

Easy CNC machining and bonding

Typical Mechanical Performance

JLONCell 130 kg/m³ PVC Foam Core provides excellent compressive and shear strength for medium-to-high-load industrial sandwich structures.
It performs reliably under static and dynamic loads, offering superior dimensional stability, fatigue resistance, and long-term durability in demanding industrial applications.

Technical Data Sheet (TDS)

For detailed physical and mechanical properties of JLONCell PVC Foam Core,please download the Technical Data Sheet below.

JLONCell PVC foam core TDS.pdf

Suitable Processes:

Hand Lay-up

Vacuum Bagging

Resin Infusion (VARTM / LRTM)

RTM Light

Processing Benefits:

Uniform resin flow during infusion

Minimal thickness variation under vacuum

Easy thermoforming for curved or complex panels

Compatible with polyester, vinyl ester, and epoxy resin systems

Density Selection Guidance (Industrial Use)

JLONCell 130 kg/m³ is typically selected when maximum stiffness and load capacity are required:

For lightweight panels: JLONCell 45 / 60

For medium-load panels: JLONCell 80 / 100

For high-load or reinforced areas: JLONCell 130 / 200

This allows engineers to optimize panel weight, performance, and cost for heavy-duty industrial applications.

Typical Industrial Applications

Industrial FRP sandwich panels under higher loads

Machine housings and covers requiring reinforced panels

Electrical and control cabinets in heavy-duty zones

Transportation and truck body panels

Reinforced modular industrial enclosures

Equipment partitions and platforms

Comparison Within JLONCell Series

Compared with JLONCell 100, the 130 kg/m³ grade provides higher compressive strength and stiffness for heavy-duty industrial panels.
Compared with JLONCell 200, it offers a good balance of load capacity and weight efficiency for most reinforced FRP applications.

Quality Control & Supply Capability

Consistent density and thickness control

Stable supply for industrial batch production

Custom sheet sizes and thickness available

Technical support for reinforced FRP sandwich panel design

JLONCell PVC Foam Core is engineered to meet the reliability expectations of industrial composite manufacturers focusing on high-performance structural panels.

FAQ – Industrial PVC Foam Core

Is 130 kg/m³ PVC foam core suitable for high-load industrial FRP sandwich panels?
Yes. It is commonly used for medium-to-high-load panels requiring reinforced stiffness.

Can JLONCell 130 be used for resin infusion processes?
Yes. Fully compatible with resin infusion, RTM Light, and other vacuum-assisted processes.

What density PVC foam core should be used for reinforced equipment enclosures?
Typically 100–130 kg/m³, depending on stiffness and load requirements.